Back End
How to Change a KTM 65 SX Clutch
The KTM 65 SX and Husky TC 65 clutch is a little different compared to most others.
Cone of Silence
You have noticed that there is a perforated metal cone in the muffler of your new Husqvarna or KTM. You want to remove it as it is restrictive but it looks like it is welded in place.
Fitting a new chain - The Fast Way
This is such a simple trick that'll save all dirtbike riders a little bit of time and a lot of frustration.
Power Valve Adjustment
Two-stroke exhaust power valves provide loads of adjustment but the trick is knowing what to do. We show you how to adjust a KTM power valve.
How to make an emergency gasket
We show you how to make your own gasket quickly using a plain sheet of gasket paper, if time is an issue and you don't have time to source the correct one.
Fixing lose kickstarter levers Tricks of the trade
Kickstarter levers always come lose and often fall off, especially on two strokes, so here's a quick tip to avoid it becoming lose
Adjusting your headlight beam Tricks of the trade
If your headlight faces too high you won't see immediate dangers when riding at night. Here's our step-by-step guide on how to adjust your light beam
Camchain tensioner lock Tricks of the trade
Camchain tensioners can often be in hard-to-reach places that prevent you from easily reaching the tensioner and setting the tension correctly with a flat-blade screwdriver
Oiling your filter Tricks of the trade
ADB's technical editor, Mat Boyd runs through a few steps on how to correctly oil and fit your air filter
Removing a difficult broken bolt Tricks of the trade
Removing a broken bolt can be difficult but when you happen to snap an Ezy-out inside the bolt it becomes an even harder job to rectify the issue.
Emergency gasket Tricks of the trade
We show you how to make your own gasket quickly using a plain sheet of gasket paper, if you're in a hurry and don't have time to source the correct one.