The Surron Hyper Bee continues to be one of the most-used bikes in our shed, and despite plenty of racing and general riding, it’s still going strong. Last month we spoke about how easy it is for Jax to jump back on the Hyper Bee and concentrate on technique rather than simply finding enough speed to clear jumps, and that hasn’t changed. If anything, we’re using it even more deliberately as a training bike now.

 

Being electric makes it bloody convenient for after-school sessions. We can drag it out and Jax can spend half an hour practising jumps, standing and sitting, riding ruts and doing slow-speed drills without having to load the ute and head somewhere to ride.

 

The Hyper Bee is still one of the fastest bikes in the 50cc class and Jax, the youngest in the class at six years old, is regularly racing kids who are almost 10 years old. Despite the age difference, he’s ripping and has picked up second- and third-place finishes in his class at Junior Trials Club enduro events. If my work hadn’t caused him to miss a few rounds, he’d probably be sitting second or third in the championship as well!

 

This month, though, we’ve had to give the Hyper Bee a little love. After the muddy race we mentioned previously in issue #563, the brakes needed changing. The pads themselves weren’t difficult, but bleeding the rear brake turned into much more of a pain than we expected.

 

The rear caliper doesn’t have a conventional bleed nipple and the banjo bolt sits below the highest point of the caliper. That meant we had an air pocket trapped above it and no matter what we initially tried, we couldn’t get all the air out and restore a nice, solid brake.

 

Our Tech Ed Mat Boyd came to the rescue with a simple solution. We removed the caliper and angled it so the banjo bolt became the highest point in the system, allowing the trapped air to finally make its way out. It’s definitely worth remembering if you’re bleeding the rear brake on a Hyper Bee and wondering why you can’t get rid of that last bit of sponginess.

 

The other maintenance job is entirely our fault. Somewhere during transport we’ve allowed the bike to lean against something and it has rubbed through some of the black paint on the frame. There’s nothing structurally wrong, but it looks ordinary, so we’re going to tidy it up with some fresh black paint and get it looking schmick again.

 

Mechanically (if you can call it that), though, the little Surron continues to impress. It gets ridden hard, raced against older kids and gets carted everywhere, often on its side, and nothing major has failed.

 

WARRANTY
12 months

DISTRIBUTOR
Surron Australia

SO FAR

TOTAL HOURS
36 hours

MODS THIS MONTH
New brake pads

MODS NEXT MONTH
Frame paint touch-up